All matter has physical and chemical properties. Extensive properties are those properties of a substance which depend on the amount of substance. They vary with the amount of the substance. Examples: Mass, weight, and volume. Intensive properties are those properties of a substance which do not depend on the amount of substance. Examples: colour, melting point, boiling point, electrical conductivity, and physical state at a given temperature.

Physical Properties of Substance:

Physical properties are characteristics that can be measured or observed without changing the composition of the substance under study. All samples of a pure substance have the same chemical and physical properties. Physical properties can be extensive or intensive. 

Mass

A mass is the amount of matter that is found in a substance. Mass is expressed in terms of kilograms (kg).

Density

Density is the measurement of mass with respect to and in a relationship with volume. The mass of a substance per its unit volume is called density. Density is expressed in kilograms per cubic metre (kg/m³). Mathematically

Density = Mass / Volume

The density depends on the temperature and pressure of the substance. The effect is prominent in cases of gases. The application of increasing temperature decreases its density because its volume increases with increasing temperatures, and the application of increasing pressure increases density because the volume decreases with increasing pressure.

Volume

Volume is the measurement of the quantity or amount of matter in a three dimensional space. It is the space occupied by the substance. Volume is expressed in cubic metres (m³).

Boiling Point:

The temperature at which a liquid changes its state to a gas at atmospheric pressure is called the boiling point of that liquid.  It is defined as the temperature at which the vapour pressure of the liquid becomes equal to the atmospheric pressure. This is the point at which both liquid and gaseous phase exists at equilibrium. The boiling point of the substance also varies with pressure and is specified at standard pressure.

The boiling point of a liquid is a characteristic property and can be treated as a criterion for the purity of liquid.  It increases with the increase in external pressure. Liquids having greater intermolecular forces have high boiling points.

Melting Point:

The temperature at which a solid changes its state to a liquid at atmospheric pressure is called the melting point of that solid. This is the point at which both liquid and solid phase exists at equilibrium. The melting point of the substance also varies with pressure and is specified at standard pressure.

The melting point of a liquid is a characteristic property and can be treated as a criterion for the purity of a solid.  It increases with the increase in external pressure. Solids having greater intermolecular forces have high melting points.

Conductivity

Conductivity is the measure of a substance’s ability, or lack of ability, to conduct electricity or heat. Some matter has a high level of conductivity and other matter has a high level of resistance to the conduction of electricity.

Heat Capacity

Simply stated, heat capacity is the amount of heat that must be added or taken away from a substance to achieve a certain temperature. Heat capacity is also referred to as thermal capacity and the amount of heat that is added or taken away is measured in terms of joules per kelvin.

Deliquescence:

Deliquescence refers to the property of a substance to absorb water from the air to dissolve itself and form an aqueous solution. Materials showing deliquescence are termed deliquescent. In order to be deliquescent, a substance must both absorb a large amount of water and be sufficiently soluble to dissolve in it. Examples: Sodium hydroxide, potassium hydroxide, anhydrous potassium chloride, anhydrous magnesium chloride, anhydrous ferric chloride show deliquescence.

Hygroscopicity:

Hygroscopicity is the tendency of a solid substance to absorb moisture from the surrounding atmosphere and are converted into hydroxides or hydrates. Anhydrous copper sulphate, quick lime (CaO), anhydrous sodium carbonate, etc. are hygroscopic in nature.

Efflorescence:

Efflorescence is a spontaneous loss of water by a hydrated salt, which occurs when the aqueous vapor pressure of the hydrate is greater than the partial pressure of the water vapour in the air. Washing soda (Na₂CO₃·10H₂O), Glauber’s salt or sodium sulphate (Na₂SO₄·10H₂O), Ferrous sulphate (FeSO₄·7H₂O), potash alum (K₂SO₄· Al₂(SO₄)₃.24H₂O) show efflorescence.

Mechanical Properties of Substance:

Strength:

It is the property of a material which opposes the deformation or breakdown of material in presence of external forces or load. Engineering materials must have the suitable mechanical strength to be capable to work under different mechanical forces or loads. It is shown by solids.

Toughness:

Toughness is the ability of a material to absorb energy and gets plastically deformed without fracturing. For good toughness, materials should have good strength as well as ductility. To be tough, the material should be capable to withstand both high stress and strain. It is shown by solids.

Elasticity:

Within elastic limit, the solid completely regains its original shape, size or volume after removal of deforming force, then the property is called elasticity. Steel, copper, aluminium show elastic behaviour.

Plasticity:

If a body is stressed beyond elastic limit, and it does not regain original shape, size, and volume after removal of deforming force, then the property is called plasticity. These substances can be given required shape very easily. Example: Plaster of paris

Hardness:

It is the ability of a material to resist permanent shape change due to external stress. There are various measures of hardness – Scratch Hardness, Indentation Hardness, and Rebound Hardness. Scratch Hardness is the ability of materials to oppose the scratches to the outer surface layer due to external force. It is shown by solids.

It is measured on Mohs’ scale. The Mohs’ scale of mineral hardness is a qualitative ordinal scale that characterizes the scratch resistance of different minerals through the ability of a harder material to scratch a softer material. It was created by the German geologist and mineralogist Friedrich Mohs in 1812.

On Moh’s scale hardness of a diamond is maximum (10) and that of talk is minimum (1). If a material can scratch topaz but can’t scratch corundum, then it possesses hardness equal to 8.

Brittleness:

The brittleness of a material indicates that how easily it gets fractured when it is subjected to a force or load. The solids of non-metal are generally brittle in nature. The brittleness of the material is temperature-dependent. Some metals which are ductile at normal temperature become brittle at low temperature. Hardness and brittleness are inverse properties. The harder the substance, the more brittle it is. It is shown by solids.

Malleability:

Malleability is a property of solid materials which indicates that how easily a material gets deformed under compressive stress. Malleability is often categorized by the ability of the material to be formed in the form of a thin sheet by hammering or rolling. This mechanical property is an aspect of the plasticity of the material. The malleability of material is temperature-dependent. With the rise in temperature, the malleability of material increases. This is the characteristic property of metals. Copper, aluminium, gold, silver show malleability. Gold is the most malleable metal.

Ductility:

Ductility is a property of a solid material indicates that how easily a material gets deformed under tensile stress. Ductility is often categorized by the ability of a material to get stretched into a wire by pulling or drawing. This mechanical property is also an aspect of the plasticity of material and is temperature-dependent. With the rise in temperature, the ductility of material increases. This is a characteristic property of metals. Copper, aluminium, gold, silver show ductility. Platinum is the most ductile metal.

Creep:

Creep is the property of a material that indicates the tendency of a material to move slowly and deform permanently under the influence of external mechanical stress. It results due to long time exposure to large external mechanical stress within the limit of yielding. Creep is more severe in materials that are subjected to heat for a long time.

Resilience:

Resilience is the ability of material to absorb the energy when it is deformed elastically by applying stress and release the energy when stress is removed. Proof resilience is defined as the maximum energy that can be absorbed without permanent deformation. The modulus of resilience is defined as the maximum energy that can be absorbed per unit volume without permanent deformation.

Fatigue:

Fatigue is the weakening of a material caused by the repeated loading of the material. When a material is subjected to cyclic loading, and loading greater than a certain threshold value but much below the strength of the material (ultimate tensile strength limit or yield stress limit), microscopic cracks begin to form at grain boundaries and interfaces. Eventually, the crack reaches a critical size. This crack propagates suddenly and the structure gets fractured.

Chemical Properties of Substance:

Chemical properties are characteristics that can only be measured or observed as matter transforms into a particular type of matter. The tendency of matter to react chemically with other substances is known as reactivity.

Reactivity:

The tendency of matter to combine chemically with other substances is known as reactivity. Certain materials like chlorine, potassium, sodium, etc. are highly reactive, whereas others like gold, platinum, etc. are extremely inactive.

Flammability:

The tendency of matter to burn is referred to as flammability. As matter burns, it reacts with oxygen and transforms into various substances. Example: wood, paper, etc. are flammable. Petrol, ethyl alcohol are highly flammable.

Toxicity:

Toxicity refers to the extent to which a chemical element or a combination of chemicals may harm an organism. Methyl alcohol, methyl isocyanate are highly toxic.

Reactivity with Acids and Bases:

A substance’s ability to react with an acid or a base is a chemical property.

Science > Chemistry > Introduction to Chemistry > Properties of Substance

The post Properties of Substance appeared first on The Fact Factor.